Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference page 87

Ausm software
Hide thumbs Also See for MGX 8850 PXM1E:
Table of Contents

Advertisement

Chapter 4
AUSM Command Reference
-maxcost
-rtngpri
-type
-rpcr
-rscr
-rmcr
-rcbs
Related Commands
cnfcon, delcon, dncon, dspcon, dspcons. rrtcon, tstcon, upcon
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Maximum end-to-end cost for the connection. Range is 1 to 2,147,483,647.
Default setting is 2147483647.
Routing priority for this connection. Range is 1 to 15. Default setting is 8.
Trunk restriction option. To restrict the connection routing to terrestrial trunks,
enter -type 2. To restrict the connection routing to satellite trunks, enter -type
3. To enable connection routing without trunk restrictions, enter -type 1.
Default setting routes connections with no restrictions.
Remote peak cell rate in cells per second (cps). The range depends on the speed
of the logical port:
T1 = 10 to 3622
E1 = 10 to 4528
Clear E1 = 10 to 4830
IMA T1 = 10 to (3591 * number_of_lines)
IMA E1 = 10 to (4490 * number_of_lines)
IMA clear E1 = 10 to (4789 * number_of_lines)
An IMA group's range depends on the number of links in the group.
Note
Multiply the single line rate by the number of lines.
Remote sustainable cell rate. The range depends on the speed of the logical port:
T1 = 10 to 3622
E1 = 10 to 4528
Clear E1 = 10 to 4830
IMA T1 = 10 to (3591 * number_of_lines)
IMA E1 = 10 to (4490 * number_of_lines)
IMA clear E1 = 10 to (4789 * number_of_lines)
An IMA group's range depends on the number of links in the group.
Note
Multiply the single line rate by the number of lines.
Remote minimum cell rate. The range depends on the speed of the logical port:
T1 = 10 to 3622
E1 = 10 to 4528
Clear E1 = 10 to 4830
IMA T1 = 10 to (3591 * number_of_lines)
IMA E1 = 10 to (4490 * number_of_lines)
IMA clear E1 = 10 to (4789 * number_of_lines)
Note
An IMA group's range depends on the number of links in the group.
Multiply the single line rate by the number of lines.
Remote maximum burst size. Range is 1 to 5,000,000.
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
addcon
4-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgx 8830

Table of Contents