Addlns2Aimgrp - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

addlns2aimgrp

addlns2aimgrp
Add Lines to AIM Group
Use the addlns2aimgrp command to add lines to an existing IMA group.
Syntax
addlns2aimgrp <group_num> <list_of_lines>
Syntax Description
group_num
list_of_lines
Related Commands
addaimgrp, cnfaimgrp, delaimgrp, dellnsfmaimgrp, dspaimgrp, dspaimgrps
Attributes
Log: Yes
Example
The following example shows how to add a single line to an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > addlns2aimgrp 1 8
PXM1E_SJ.1.1.AUSMB8.a >
The next example shows how to add multiple lines to an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > addlns2aimgrp 1 7.8
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-18
Enter the number for the IMA group you want to modify. Use the dspimagrps
command to display the configured IMA groups.
List the lines to be included in the group. Separate each line number by a period.
For example, 1.2.3.4 adds lines 1 through 4 to the IMA group.
State: Active Privilege: Group 1
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002