Table of Contents
Advertisement
About This Book
This preface describes the objectives, audience, organization, and conventions of the Cisco AUSM
Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830.
Objectives
This guide describes how to configure ATM services and provides detailed information about the
commands used to configure ATM services.
Audience
The Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and
MGX 8830 provides network operators and administrators who are responsible for MGX 8250,
MGX8230, MGX 8850, or MGX8830 switches with information to set up ATM services, whether the
Cisco WAN switch used is running a PXM1 card or a PXM1E card, which now provides Release 3 users
access to narrowband service modules.
Organization
The body of this publication is:
Chapter
Chapter
Chapter
Chapter
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
1
Introduction. This chapter introduces the AUSM cards covered in this guide and their
features.
2
Provisioning Communications
connections between the AUSM cards described in this guide and between these
AUSM cards and other types of cards.
3
AUSM Card
Management. This chapter describes card management tasks you might
want to do after provisioning is complete.
4
AUSM Command
(CLI) commands that you can use to configure, provision, and manage the AUSM
cards.
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Links. This chapter describes how to provision
Reference. This chapter describes the command-line interface
xiii
Advertisement
Table of Contents
