Chapter 4
AUSM Command Reference
addlns2imagrp
Add Lines to IMA Group
Use the addlns2imagrp command to add lines to an existing IMA group.
Syntax
addlns2imagrp <group_num> <list_of_lines>
Syntax Description
group_num
list_of_lines
Related Commands
addimagrp, cnfimagrp, delimagrp, dellnsfmimagrp, dspimagrp, dspimagrps
Attributes
Log: Yes
Example
The following example shows how to add a single line to an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > addlns2imagrp 1 8
PXM1E_SJ.1.1.AUSMB8.a >
The next example shows how to add multiple lines to an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > addlns2imagrp 1 7.8
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the number for the IMA group you want to modify. Use the dspimagrps
command to display the configured IMA groups.
List the lines to be included in the group. Separate each line number by a period.
For example, 1.2.3.4 adds lines 1 through 4 to the IMA group.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
addlns2imagrp
4-19