Chapter 4
AUSM Command Reference
dncon
Down Connection
Use the dncon command to bring down a connection.
Note
This command operates only on master endpoints.
Syntax
dncon <port_num.vpi.vci | channel_num>
Syntax Description
port_num
vpi
vci
channel_num
Related Commands
addcon, delcon, dspcon, dspcons, upcon
Attributes
Log: Yes
Example
Bring down the connection on channel 19.
PXM1E_SJ.1.4.AUSMB8.a > dncon 19
PXM1E_SJ.1.4.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number for the connection you want to modify. To display a list
of configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
Enter the channel number of the connection you want to modify. The dspcons
command displays connection channel numbers in the LCN column.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
dncon
4-105