Dellnsfmimagrp - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dellnsfmimagrp

dellnsfmimagrp
Delete Lines from IMA Group
Use the dellnsfmimagrp command to remove lines from an existing IMA group.
Syntax
dellnsfmimagrp <group_num> <list_of_lines>
Syntax Description
group_num
list_of_lines
Related Commands
addimagrp, addlns2imagrp, cnfimagrp, delimagrp, dspimagrp, dspimagrps
Attributes
Log: Yes
Example
The following example shows how to delete a single line from an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > dellnsfmimagrp 1 8
Warning: If Connections exist under the ima group then the cell rates might require
modification
PXM1E_SJ.1.1.AUSMB8.a >
The next example shows how to delete multiple lines from an IMA group.
PXM1E_SJ.1.1.AUSMB8.a > dellnsfmimagrp 1 7.8
Warning: If Connections exist under the ima group then the cell rates might require
modification
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-102
Enter the number for the IMA group you want to modify. Use the dspimagrps
command to display the configured IMA groups.
List the lines to be included in the group. Separate each line number by a period.
For example, 1.2.3.4 adds lines 1 through 4 to the IMA group.
State: Active Privilege: Group 1
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002