Configuring An L2Ve Interface - HP FlexNetwork HSR6600 Configuration Manual

•
Configure MPLS L3VPN or IP routes. For more information about MPLS L3VPN configuration,
see "Configuring MPLS L3VPN."

Configuring an L2VE interface

Step
1. Enter system view.
2. Create an L2VE
interface and enter its
view.
3. (Optional.) Configure a
description for the
interface.
4. (Optional.) Set the MTU
for the interface.
5. (Optional.) Set the
expected bandwidth for
the interface.
6. (Optional.) Restore the
default settings for the
interface.
7. (Optional.) Bring up the
interface.
Configuring an L3VE interface
Step
1. Enter system view.
2. Create an L3VE
interface and enter its
view.
3. (Optional.) Configure a
description for the
interface.
4. (Optional.) Set the MTU
for the interface.
5. (Optional.) Set the
expected bandwidth for
the interface.
6. (Optional.) Restore the
default settings for the
interface.
7. (Optional.) Bring up the
interface.
Command
system-view
interface ve-l2vpn
interface-number
description text
mtu size
bandwidth bandwidth-value
default
undo shutdown
Command
system-view
interface ve-l3vpn
interface-number
description text
mtu size
bandwidth bandwidth-value
default
undo shutdown
484
Remarks
N/A
By default, no L2VE interfaces exist.
You can create a maximum of 8192
L2VE interfaces on a device.
By default, the description for the
interface is VE-L2VPNnumber
Interface, for example, VE-L2VPN100
Interface.
By default, the interface MTU is 1500
bytes.
By default, the expected bandwidth is
100000 kbps.
N/A
By default, the interface is up.
Remarks
N/A
By default, no L3VE interfaces exist.
You can create a maximum of 8192 L3VE
interfaces on a device.
By default, the description for the interface
is VE-L3VPNnumber Interface, for
example, VE-L3VPN100 Interface.
By default, the interface MTU is 1500
bytes.
By default, the expected bandwidth is
100000 kbps.
N/A
By default, the interface is up.