Rsvp Configuration Examples - HP FlexNetwork HSR6600 Configuration Manual

Task
Display information about the security
associations established with RSVP
neighbors.
Display information about CRLSPs
established through RSVP.
Display information about RSVP neighbors.
Display information about RSVP resource
reservation requests sent to upstream
devices.
Display information about RSVP resource
reservation states.
Display information about RSVP path states.
Display RSVP statistics.
Clear RSVP security associations.
Clear RSVP statistics.

RSVP configuration examples

Establishing an MPLS TE tunnel with RSVP-TE
Network requirements
Router A, Router B, Router C, and Router D run IS-IS and all of them are Layer 2 routers.
Use RSVP-TE to establish an MPLS TE tunnel from Router A to Router D to transmit data between
the two IP networks. The MPLS TE tunnel requires a bandwidth of 2000 kbps.
The maximum bandwidth of the link that the tunnel traverses is 10000 kbps and the maximum
reservable bandwidth of the link is 5000 kbps.
Command
display rsvp authentication [ from ip-address ] [ to
ip-address ] [ verbose ]
display rsvp lsp [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ lsp-id lsp-id ] [ verbose ]
display rsvp peer [ interface interface-type
interface-number ] [ ip ip-address ] [ verbose ]
display rsvp request [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ prevhop ip-address ]
[ verbose ]
display rsvp reservation [ destination ip-address ]
[ source ip-address ] [ tunnel-id tunnel-id ] [ nexthop
ip-address ] [ verbose ]
display rsvp sender [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ lsp-id lsp-id ] [ verbose ]
display rsvp statistics [ interface [ interface-type
interface-number ] ]
reset rsvp authentication [ from ip-address to ip-address ]
reset rsvp statistics [ interface [ interface-type
interface-number ]
179