Configuring Vpn Instances - HP FlexNetwork HSR6600 Configuration Manual

Tasks at a glance
Configuring routing on an
(Required.)
(Required.)

Configuring VPN instances

By configuring VPN instances on a PE, you isolate not only VPN routes from public network routes,
but also routes between VPNs. This feature allows VPN instances to be used in network scenarios in
addition to MPLS L3VPNs.
All VPN instance configurations are performed on PEs or MCEs.
Creating a VPN instance
A VPN instance is a collection of the VPN membership and routing rules of its associated site. A VPN
instance might correspond to more than one VPN.
To create and configure a VPN instance:
Step
1. Enter system view.
2. Create a VPN instance and
enter VPN instance view.
3. Configure an RD for the VPN
instance.
4. (Optional.) Configure a
description for the VPN
instance.
5. (Optional.) Set an ID for the
VPN instance.
6. (Optional.) Configure an
SNMP context for the VPN
instance.
Associating a VPN instance with an interface
After creating and configuring a VPN instance, associate the VPN instance with the interface
connected to the CE.
To associate a VPN instance with an interface:
Step
1. Enter system view.
2. Enter interface view.
MCE:
Configuring routing between an MCE and a VPN site
Configuring routing between an MCE and a PE
Command
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
description text
vpn-id vpn-id
snmp context-name
context-name
Command
system-view
interface interface-type
interface-number
528
Remarks
N/A
By default, no VPN instances
exist.
By default, no RD is configured for
a VPN instance.
By default, no description is
configured for a VPN instance.
The description should contain
the VPN instance's related
information, such as its
relationship with a certain VPN.
By default, no ID is configured for
a VPN instance.
By default, no SNMP context is
configured.
Remarks
N/A
N/A