Protocols - HP FlexNetwork HSR6600 Configuration Manual

Figure 15 LDP over MPLS TE

Protocols

•
RFC 5036, LDP Specification
•
draft-ietf-mpls-ldp-ipv6-09.txt
LDP configuration task list
Tasks at a glance
Enable LDP:
5. (Required.)
6. (Required.)
(Optional.) Configuring Hello parameters
(Optional.) Configuring LDP session parameters
(Optional.) Configuring LDP backoff
(Optional.) Configuring LDP MD5 authentication
(Optional.) Configuring LDP to redistribute BGP unicast routes
(Optional.) Configuring an LSP generation policy
(Optional.) Configuring the LDP label distribution control mode
(Optional.) Configuring a label advertisement policy
(Optional.) Configuring a label acceptance policy
(Optional.) Configuring LDP loop detection
(Optional.) Configuring LDP session protection
(Optional.) Configuring LDP GR
(Optional.) Configuring LDP NSR
(Optional.) Configuring LDP-IGP synchronization
(Optional.) Configuring LDP FRR
(Optional.) Setting a DSCP value for outgoing LDP packets
Enabling LDP globally
Enabling LDP on an interface
25