HP FlexNetwork HSR6600 Configuration Manual page 232

Comware 7 mpls
Hide thumbs Also See for FlexNetwork HSR6600:
Table of Contents

Advertisement

Configuring IBGP between a PE and a CE
Use IBGP between PE and CE only in a basic MPLS L3VPN network. In networks such as
Hub&Spoke, Extranet, inter-AS VPN, carrier's carrier, nested VPN, and HoVPN, you cannot use
IBGP between PE and CE.
1.
Configure the PE:
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Enter BGP-VPN instance
view.
4.
Configure the CE as the
VPN IBGP peer.
5.
Create the BGP-VPN IPv4
unicast family and enter its
view.
6.
Enable IPv4 unicast route
exchange with the
specified peer.
2.
Configure the CE:
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Configure the PE as an
IBGP peer.
4.
Create the BGP IPv4
unicast family and enter its
view.
5.
Enable IPv4 unicast route
exchange with the
specified peer or peer
group.
6.
(Optional.) Configure route
redistribution.
Command
system-view
bgp as-number [ instance
instance-name ]
ip vpn-instance
vpn-instance-name
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address
[ mask-length ] } enable
Command
system-view
bgp as-number [ instance
instance-name ]
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address
[ mask-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value
| route-policy
route-policy-name ] * ]
222
Remarks
N/A
N/A
Configuration commands in
BGP-VPN instance view are the
same as those in BGP instance
view. For more information, see
Layer 3—IP Routing
Configuration Guide.
By default, no BGP peers exist.
By default, the BGP-VPN IPv4
unicast family is not created.
By default, BGP does not
exchange IPv4 unicast routes
with any peer.
Remarks
N/A
N/A
By default, no BGP peers exist.
By default, the BGP IPv4
unicast family is not created.
By default, BGP does not
exchange IPv4 unicast routes
with any peer.
A CE must redistribute its routes
to the PE so the PE can
advertise them to the peer CE.

Advertisement

Table of Contents
loading

Table of Contents