Mpls L2Vpn Configuration Examples - HP FlexNetwork HSR6600 Configuration Manual

Task
Display L2VPN PW information.
Display PW class information.
Display cross-connect group
information.
Display L2VPN label block
information.
Display BGP L2VPN peer group
information.
Display L2VPN label block
information discovered by BGP.
Display BGP L2VPN peer
information.
Display BGP L2VPN update group
information.
Reset BGP sessions for L2VPN.
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp l2vpn commands, see Layer 3—IP Routing Command
Reference.

MPLS L2VPN configuration examples

Configuring local MPLS L2VPN connections
Network requirements
Configure local MPLS L2VPN connections between the PE and CEs to allow Layer 2 communication
between CE 1 and CE 2.
Figure 108 Network diagram
Configuration procedure
1. Configure CE 1.
<CE1> system-view
Command
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp
| ldp | static } ] [ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn xconnect-group [ name group-name ] [ verbose ]
display l2vpn bgp [ peer ip-address | local ] [ xconnect-group
group-name ] [ verbose ]
display bgp [ instance instance-name ] group l2vpn
[ group-name group-name ]
display bgp [ instance instance-name ] l2vpn signaling [ peer
ip-address { advertised | received } [ statistics ] |
route-distinguisher route-distinguisher [ site-id site-id
[ label-offset label-offset [ advertise-info ] ] ] | statistics ]
display bgp [ instance instance-name ] peer l2vpn [ ip-address
mask-length | group-name group-name log-info | ip-address
{ log-info | verbose } | verbose ]
display bgp [ instance instance-name ] update-group l2vpn
[ ip-address ]
reset bgp [ instance instance-name ] { as-number | ip-address
[ mask-length ] | all | external | group group-name | internal } l2vpn
408