HP FlexNetwork HSR6600 Configuration Manual page 382

Comware 7 mpls

Hide thumbs Also See for FlexNetwork HSR6600:

Table of Contents

[PE3-GigabitEthernet1/1/1] ipv6 address 2001:1::2 96

[PE3-GigabitEthernet1/1/1] quit

[PE3] bgp 100

[PE3-bgp-default] ip vpn-instance vpn1

[PE3-bgp-default-vpn1] peer 2001:1::1 as-number 65410

[PE3-bgp-default-vpn1] address-family ipv6 unicast

[PE3-bgp-default-ipv6-vpn1] peer 2001:1::1 enable

[PE3-bgp-default-ipv6-vpn1] quit

[PE3-bgp-default-vpn1] quit

[PE3-bgp-default] quit

# Configure PE 4 and CE 4 in the same way that PE 3 and CE 3 are configured. (Details not

Configure an MP-IBGP peer relationship between the PEs of the customer carrier to exchange

the VPN routes of the end customers:

# Configure PE 3.

[PE3] bgp 100

[PE3-bgp-default] peer 6.6.6.9 as-number 100

[PE3-bgp-default] peer 6.6.6.9 connect-interface loopback 0

[PE3-bgp-default] address-family vpnv6

[PE3-bgp-default-af-vpnv6] peer 6.6.6.9 enable

[PE3-bgp-default-af-vpnv6] quit

[PE3-bgp-default] quit

# Configure PE 4 in the same way that PE 3 is configured. (Details not shown.)

Verifying the configuration

Display the public network routing table and VPN routing table on the provider carrier PEs, for

example, on PE 1:

# Verify that the public network routing table contains only routes of the provider carrier

[PE1] display ip routing-table

Destinations : 14

Destination/Mask

30.1.1.255/32

127.0.0.0/32

127.0.0.1/32

127.255.255.255/32 Direct

224.0.0.0/24

255.255.255.255/32 Direct

# Verify that the VPN routing table contains the internal routes of the customer carrier network.