HP FlexNetwork HSR6600 Configuration Manual page 133
Comware 7 mpls
Hide thumbs
Also See for FlexNetwork HSR6600:
- Command reference manual (542 pages) ,
- Troubleshooting manual (41 pages) ,
- Security configuration manual (559 pages)
Table of Contents
Advertisement
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Configure Router D.
[RouterD] ospf
[RouterD-ospf-1] opaque-capability enable
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] mpls te enable
[RouterD-ospf-1-area-0.0.0.0] quit
[RouterD-ospf-1] quit
6.
Configure an explicit path on Router A. Specify Router B and Router D as loose nodes, and
Router C as a strict node.
[RouterA] explicit-path atod
[RouterA-explicit-path-atod] nexthop 10.1.1.2 include loose
[RouterA-explicit-path-atod] nexthop 20.1.1.2 include strict
[RouterA-explicit-path-atod] nexthop 30.1.1.2 include loose
[RouterA-explicit-path-atod] quit
7.
Configure MPLS TE attributes of links:
# Set the maximum link bandwidth and maximum reservable bandwidth on Router A.
[RouterA] interface gigabitethernet 1/1/1
[RouterA-GigabitEthernet1/1/1] mpls te max-link-bandwidth 10000
[RouterA-GigabitEthernet1/1/1] mpls te max-reservable-bandwidth 5000
[RouterA-GigabitEthernet1/1/1] quit
# Set the maximum link bandwidth and maximum reservable bandwidth on Router B.
[RouterB] interface gigabitethernet 1/1/1
[RouterB-GigabitEthernet1/1/1] mpls te max-link-bandwidth 10000
[RouterB-GigabitEthernet1/1/1] mpls te max-reservable-bandwidth 5000
[RouterB-GigabitEthernet1/1/1] quit
[RouterB] interface pos 1/1/0
[RouterB-POS1/1/0] mpls te max-link-bandwidth 10000
[RouterB-POS1/1/0] mpls te max-reservable-bandwidth 5000
[RouterB-POS1/1/0] quit
# Set the maximum link bandwidth and maximum reservable bandwidth on Router C.
[RouterC] interface gigabitethernet 1/1/1
[RouterC-GigabitEthernet1/1/1] mpls te max-link-bandwidth 10000
[RouterC-GigabitEthernet1/1/1] mpls te max-reservable-bandwidth 5000
[RouterC-GigabitEthernet1/1/1] quit
[RouterC] interface pos 1/1/0
[RouterC-POS1/1/0] mpls te max-link-bandwidth 10000
[RouterC-POS1/1/0] mpls te max-reservable-bandwidth 5000
[RouterC-POS1/1/0] quit
# Set the maximum link bandwidth and maximum reservable bandwidth on Router D.
[RouterD] interface gigabitethernet 1/1/1
[RouterD-GigabitEthernet1/1/1] mpls te max-link-bandwidth 10000
[RouterD-GigabitEthernet1/1/1] mpls te max-reservable-bandwidth 5000
[RouterD-GigabitEthernet1/1/1] quit
8.
Configure an MPLS TE tunnel on Router A:
# Configure MPLS TE tunnel interface Tunnel 1.
[RouterA] interface tunnel 1 mode mpls-te
123
Advertisement
Table of Contents
