HP FlexNetwork HSR6600 Configuration Manual page 544

Comware 7 mpls
Hide thumbs Also See for FlexNetwork HSR6600:
Table of Contents

Advertisement

Step
3.
Enter BGP-VPN instance
view.
4.
Configure an IBGP peer.
5.
Enter BGP-VPN IPv6
unicast address family
view.
6.
Enable BGP to exchange
IPv6 unicast routes with the
peer.
7.
(Optional.) Configure the
system to be the RR, and
specify the peer as the
client of the RR.
8.
Redistribute remote site
routes advertised by the
PE into BGP.
2.
Configure a VPN site:
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Configure the MCE as an
IBGP peer.
4.
Enter BGP-VPN IPv6
unicast address family
view.
5.
Enable BGP to exchange
IPv6 unicast routes with the
peer.
6.
Redistribute the IGP routes
of the VPN into BGP.
Command
ip vpn-instance
vpn-instance-name
peer { group-name |
ipv6-address [ prefix-length ] }
as-number as-number
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address [ prefix-length ] }
enable
peer { group-name |
ipv6-address [ prefix-length ] }
reflect-client
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value
| route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number [ instance
instance-name ]
peer { group-name |
ipv6-address [ prefix-length ] }
as-number as-number
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address [ prefix-length ] }
enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value
| route-policy
route-policy-name ] * ]
534
Remarks
N/A
By default, no BGP peers or
peer groups exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no RR or RR client is
configured.
After you configure a VPN site
as an IBGP peer, the MCE does
not advertise the BGP routes
learned from the VPN site to
other IBGP peers, including
VPNv6 peers. The MCE
advertises routes learned from a
VPN site only when you
configure the VPN site as a
client of the RR (the MCE).
By default, no routes are
redistributed into BGP.
Remarks
N/A
By default, BGP is not enabled.
By default, no BGP peers or
peer groups exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.
A VPN site must advertise VPN
network addresses to the
connected MCE.

Advertisement

Table of Contents
loading

Table of Contents