Mce Configuration Task List - HP FlexNetwork HSR6600 Configuration Manual

Figure 136 Network diagram for the MCE feature
You can configure static routes, RIP, OSPF, IS-IS, EBGP, or IBGP between an MCE and a VPN site
and between an MCE and a PE.
NOTE:
To implement dynamic IP assignment for DHCP clients in private networks, you can configure
DHCP server or DHCP relay agent on the MCE. When the MCE functions as the DHCP server, the
IP addresses assigned to different private networks cannot overlap.

MCE configuration task list

Tasks at a glance
Configuring VPN
(Required.)
(Required.)
(Optional.) Configuring route related attributes for a VPN instance
Configuring routing on an
(Required.)
(Required.)
Configuring VPN instances
VPN instances isolate VPN routes from public network routes and routes among VPNs. This feature
allows VPN instances to be used in network scenarios in addition to MPLS L3VPNs.
All VPN instance configurations are performed on PEs or MCEs.
instances:
Creating a VPN instance
Associating a VPN instance with an interface
MCE:
Configuring routing between an MCE and a VPN site
Configuring static routing between an MCE and a PE
511