HP FlexNetwork HSR6600 Configuration Manual page 502

Table 47 Interface and IP address assignment
Device
CE 1
PE 1
P
CE 2
Configuration procedure
1. Configure IP addresses for interfaces as shown in
2. Create interfaces VE-L2VPN 1 and VE-L3VPN 1 on PE-agg:
# Create interface VE-L2VPN 1.
<PEagg> system-view
[PEagg] interface ve-l2vpn 1
[PEagg-VE-L2VPN1] quit
# Create interface VE-L3VPN 1, and configure an IP address for the interface.
[PEagg] interface ve-l3vpn 1
[PEagg-VE-L3VPN1] ip address 100.1.1.2 24
[PEagg-VE-L3VPN1] quit
3. Configure MPLS L2VPN:
a. Configure OSPF on PE 1, P, and PE-agg, and advertise interface addresses:
# Configure PE 1.
<PE1> system-view
[PE1] ospf
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
[PE1-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# Configure the P device.
<P> system-view
[P] ospf
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] network 2.2.2.9 0.0.0.0
[P-ospf-1-area-0.0.0.0] network 10.2.2.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] quit
[P-ospf-1] quit
# Configure PE-agg.
[PEagg] ospf
[PEagg-ospf-1] area 0
[PEagg-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[PEagg-ospf-1-area-0.0.0.0] network 10.2.2.0 0.0.0.255
Interface IP address
GE1/1/1 100.1.1.1/24
Loop0 1.1.1.9/32
POS1/1/0 10.2.1.1/24
Loop0 2.2.2.9/32
POS1/1/0 10.2.1.2/24
POS1/1/1 10.2.2.1/24
GE1/1/1 100.2.1.2/24
Device Interface
PE-agg Loop0
POS1/1/0
POS1/1/1
VE-L3VPN1
PE 2 POS1/1/0
GE1/1/1
Table 47. (Details not shown.)
492
IP address
3.3.3.9/32
10.2.2.2/24
10.3.3.1/24
100.1.1.2/24
10.3.3.2/24
100.2.1.1/24