HP FlexNetwork HSR6600 Configuration Manual page 367

Device
ASBR-PE 1
Configuration procedure
1. Configure PE 1:
# Configure IS-IS on PE 1.
<PE1> system-view
[PE1] isis 1
[PE1-isis-1] network-entity 10.111.111.111.111.00
[PE1-isis-1] quit
# Configure LSR ID, and enable MPLS and LDP.
[PE1] mpls lsr-id 2.2.2.9
[PE1] mpls ldp
[PE1-ldp] quit
# Configure interface Serial 1/1/0, and enable IS-IS, MPLS, and LDP on the interface.
[PE1] interface serial 1/1/0
[PE1-Serial1/1/0] ip address 1.1.1.2 255.0.0.0
[PE1-Serial1/1/0] isis enable 1
[PE1-Serial1/1/0] mpls enable
[PE1-Serial1/1/0] mpls ldp enable
[PE1-Serial1/1/0] quit
# Configure interface Loopback 0, and enable IS-IS on it.
[PE1] interface loopback 0
[PE1-LoopBack0] ip address 2.2.2.9 32
[PE1-LoopBack0] isis enable 1
[PE1-LoopBack0] quit
# Create VPN instance vpn1, and configure the RD and route target attributes.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 11:11
[PE1-vpn-instance-vpn1] vpn-target 1:1 2:2 3:3 import-extcommunity
[PE1-vpn-instance-vpn1] vpn-target 3:3 export-extcommunity
[PE1-vpn-instance-vpn1] quit
# Bind the interface connected to CE 1 to the created VPN instance.
[PE1] interface gigabitethernet 1/1/1
[PE1-GigabitEthernet1/1/1] ip binding vpn-instance vpn1
[PE1-GigabitEthernet1/1/1] ip address 30::1 64
[PE1-GigabitEthernet1/1/1] quit
# Enable BGP on PE 1.
[PE1] bgp 100
# Configure IBGP peer 3.3.3.9 as a VPNv6 peer.
[PE1-bgp-default] peer 3.3.3.9 as-number 100
[PE1-bgp-default] peer 3.3.3.9 connect-interface loopback 0
[PE1-bgp-default] address-family vpnv6
[PE1-bgp-default-vpnv6] peer 3.3.3.9 enable
Interface IP address
Loop0 3.3.3.9/32
Ser1/1/0 1.1.1.1/8
Ser1/1/1 11.0.0.2/8
Device Interface
ASBR-PE 2 Loop0
Ser1/1/0
Ser1/1/1
357
IP address
4.4.4.9/32
9.1.1.1/8
11.0.0.1/8