Displaying And Maintaining Mpls Te - HP FlexNetwork HSR6600 Configuration Manual

SNMP on the device. For more information about SNMP configuration, see the network
management and monitoring configuration guide for the device.
To enable SNMP notifications for MPLS TE:
Step
1. Enter system view.
2. Enable SNMP
notifications for MPLS TE.

Displaying and maintaining MPLS TE

Execute display commands in any view and reset commands in user view.
Task
Display information about explicit paths.
Display link and node information in an IS-IS
TEDB.
Display sub-TLV information for IS-IS TE.
Display network information in an IS-IS TEDB.
Display IS-IS tunnel interface information.
Display DS-TE information.
Display bandwidth information on MPLS
TE-enabled interfaces.
Display information about discovered PCEs.
Display CRLSP information in a PCE LSPDB.
Display PCC and PCE peer information.
Display PCC and PCE statistics.
Display MPLS TEDB information.
Display information about MPLS TE tunnel
interfaces.
Display information about PCEs discovered by
OSPF.
Display link and node information in an OSPF
TEDB.
Display network information in an OSPF TEDB.
Command
system-view
snmp-agent trap enable te
Command
display explicit-path [ path-name ]
display isis mpls te advertisement [ [ level-1 |
level-2 ] | [ originate-system system-id | local ] |
verbose ] * [ process-id ]
display isis mpls te configured-sub-tlvs [ process-id ]
display isis mpls te network [ [ level-1 | level-2 ] |
local | lsp-id lsp-id ]* [ process-id ]
display isis mpls te tunnel [ level-1 | level-2 ]
[ process-id ]
display mpls te ds-te
display mpls te link-management
bandwidth-allocation [ interface interface-type
interface-number ]
display mpls te pce discovery [ ip-address ]
[ verbose ]
display mpls te pce lspdb [ plsp-id plsp-id ]
[ verbose ]
display mpls te pce peer [ ip-address ] [ verbose ]
display mpls te pce statistics [ ip-address ]
display mpls te tedb { { isis { level-1 | level-2 } | ospf
area area-id } | link ip-address | network | node [ local |
mpls-lsr-id ] | summary }
display mpls te tunnel-interface [ tunnel number ]
display ospf [ process-id ] [ area area-id ] mpls te pce
[ originate-router advertising-router-id | self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te
advertisement [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te
network [ originate-router advertising-router-id |
self-originate ]
107
Remarks
N/A
By default, SNMP notifications for
MPLS TE are enabled.