Configuring A Cross-Connect - HP FlexNetwork HSR6600 Configuration Manual

Ethernet subinterface, both the default PW data encapsulation type and default access mode are
VLAN.
The PW data encapsulation type and AC access mode determine how the VLAN tag is processed by
a PE. Therefore, the PW data encapsulation types and AC access modes on the local PE and the
peer PE must match.
To configure the interface with Ethernet or VLAN encapsulation:
Step
1. Enter system view.
2. Enter interface view.
3. (Optional.) Specify the default
next hop IP address or MAC
address.
Configuring the interface with PPP encapsulation
Step
1. Enter system view.
2. Enter interface view.
3. Configure the link layer
protocol.
4. (Optional.) Configure IPCP
negotiation without an IP
address or specify the IPCP
proxy IP address.
Configuring the interface with HDLC encapsulation
Step
1. Enter system view.
2. Enter interface view.
3. Configure the link layer
protocol.

Configuring a cross-connect

Step
1. Enter system view.
2. Create a cross-connect
group and enter
cross-connect group view.
3. (Optional.) Configure a
description for the
cross-connect group.
Command
system-view
interface interface-type
interface-number
default-nexthop { ip ip-address |
mac { mac-address | broadcast } }
Command
system-view
interface { serial | pos } number
link-protocol ppp
•
To configure IPCP negotiation
without an IP address:
ppp ipcp ignore local-ip
•
To specify the IPCP proxy IP
address:
ppp ipcp proxy ip-address
Command
system-view
interface { serial | pos } number
link-protocol hdlc
Command
system-view
xconnect-group group-name
description text
399
Remarks
N/A
N/A
Required for MPLS L2VPN
interworking.
By default, no default next hop
is specified.
Remarks
N/A
N/A
By default, the link layer
protocol is PPP.
By default, IPCP negotiation
without an IP address is not
supported and no IPCP proxy
address is specified.
Remarks
N/A
N/A
By default, the link layer
protocol is PPP.
Remarks
N/A
By default, no cross-connect
groups exist.
By default, no description is
configured for the cross-connect
group.