Configuration Procedure - HP FlexNetwork HSR6600 Configuration Manual

Comware 7 mpls

Hide thumbs Also See for FlexNetwork HSR6600:

Table of Contents

Figure 43 Network diagram

Configuration procedure

Configure IP addresses and masks for interfaces. (Details not shown.)

Configure IS-IS to advertise interface addresses, including the loopback interface address:

# Configure Router A.

<RouterA> system-view

[RouterA] isis 1

[RouterA-isis-1] network-entity 00.0005.0000.0000.0001.00

[RouterA-isis-1] quit

[RouterA] interface gigabitethernet 1/1/1

[RouterA-GigabitEthernet1/1/1] isis enable 1

[RouterA-GigabitEthernet1/1/1] quit

[RouterA] interface loopback 0

[RouterA-LoopBack0] isis enable 1

[RouterA-LoopBack0] quit

# Configure Router B.

<RouterB> system-view

[RouterB] isis 1

[RouterB-isis-1] network-entity 00.0005.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface gigabitethernet 1/1/1

[RouterB-GigabitEthernet1/1/1] isis enable 1

[RouterB-GigabitEthernet1/1/1] quit

[RouterB] interface gigabitethernet 1/1/2

[RouterB-GigabitEthernet1/1/2] isis enable 1

[RouterB-GigabitEthernet1/1/2] quit

[RouterB] interface loopback 0

[RouterB-LoopBack0] isis enable 1

[RouterB-LoopBack0] quit

# Configure Router C.

<RouterC> system-view

[RouterC] isis 1