Configuring An L2Ve Interface - HP HPE FlexNetwork MSR Router Series Configuration Manual

Configuring an L2VE interface

Step
1. Enter system view.
2. Create an L2VE interface and
enter its view.
3. (Optional.) Configure a
description for the interface.
4. (Optional.) Set the MTU for
the interface.
5. (Optional.) Set the expected
bandwidth for the interface.
6. (Optional.) Restore the
default settings for the
interface.
7. (Optional.) Bring up the
interface.
Configuring an L3VE interface
Step
1. Enter system view.
2. Create an L3VE interface
and enter its view.
3. (Optional.) Configure a
description for the
interface.
4. (Optional.) Set the MTU for
the interface.
5. (Optional.) Set the
expected bandwidth for the
interface.
6. (Optional.) Restore the
default settings for the
interface.
7. (Optional.) Bring up the
interface.
Command
system-view
interface ve-l2vpn
interface-number
description text
mtu size
bandwidth bandwidth-value
default
undo shutdown
Command
system-view
interface ve-l3vpn
interface-number
description text
mtu size
bandwidth bandwidth-value
default
undo shutdown
501
Remarks
N/A
By default, no L2VE interface is
created on the device.
You can create a maximum of 8192
L2VE interfaces on a device.
By default, the description of the
interface is VE-L2VPNnumber
Interface, for example,
VE-L2VPN100 Interface.
By default, the MTU is 1500 bytes.
By default, the expected bandwidth is
100000 kbps.
N/A
By default, the interface is up.
Remarks
N/A
By default, no L3VE interface is
created on the device.
You can create a maximum of 8192
L3VE interfaces on a device.
By default, the description of the
interface is VE-L3VPNnumber
Interface, for example,
VE-L3VPN100 Interface.
By default, the MTU is 1500 bytes.
By default, the expected bandwidth is
100000 kbps.
N/A
By default, the interface is up.