HP FlexNetwork HSR6600 Configuration Manual page 443

Figure 116 Network diagram
Table 45 Interface and IP address assignment
Device
CE 1
PE 1
PE 2
CE 2
Configuration procedure
1. Configure CE 1.
<CE1> system-view
[CE1] interface gigabitethernet 1/1/1
[CE1-GigabitEthernet1/1/1] ip address 100.1.1.1 24
[CE1-GigabitEthernet1/1/1] quit
2. Configure PE 1:
# Configure an LSR ID.
<PE1> system-view
[PE1] interface loopback 0
[PE1-LoopBack0] ip address 192.1.1.1 32
[PE1-LoopBack0] quit
[PE1] mpls lsr-id 192.1.1.1
# Enable L2VPN.
[PE1] l2vpn enable
# Enable global LDP.
[PE1] mpls ldp
[PE1-ldp] quit
# Configure GigabitEthernet 1/1/2 (the interface connected to ASBR 1), and enable LDP on the
interface.
[PE1] interface gigabitethernet 1/1/2
[PE1-GigabitEthernet1/1/2] ip address 23.1.1.1 24
[PE1-GigabitEthernet1/1/2] mpls enable
Interface IP address
GE1/1/1 100.1.1.1/24
Loop0 192.1.1.1/32
GE1/1/2 23.1.1.1/24
Loop0 192.4.4.4/32
GE1/1/2 22.2.2.1/24
GE1/1/1 100.1.1.2/24
Device Interface
ASBR 1 Loop0
GE1/1/2
GE1/1/1
ASBR 2 Loop0
GE1/1/1
GE1/1/2
433
IP address
192.2.2.2/32
23.1.1.2/24
26.2.2.2/24
192.3.3.3/32
26.2.2.3/24
22.2.2.3/24