Configuring A Layer 3 Interface - HP FlexNetwork HSR6600 Configuration Manual
Comware 7 mpls
Hide thumbs
Also See for FlexNetwork HSR6600:
- Command reference manual (542 pages) ,
- Troubleshooting manual (41 pages) ,
- Security configuration manual (559 pages)
Table of Contents
Advertisement
NOTE:
When VLANs are globally unique, packets with the same VLAN ID are forwarded by the same VSI
regardless of the receiving interfaces. If VLANs are unique on a per interface basis, packets with the
same VLAN ID from different interfaces can be forwarded by different VSIs.
Configuring a Layer 3 interface
To create a Layer 2 link between a PE and a CE, configure the Layer 3 interface that connects the PE
to the CE.
The Layer 3 interface can be a Layer 3 Ethernet interface (including physical Layer 3 Ethernet
interface and VE-L2VPN interface) or Layer 3 Ethernet subinterface.
For more information about Ethernet interfaces, see Interface Configuration Guide. For more
information about VE-L2VPN interfaces, see "Configuring L2VPN access to L3VPN or IP backbone."
Configuring a VSI
Step
1.
Enter system view.
2.
Create a VSI and enter VSI
view.
3.
(Optional.) Configure a
description for the VSI.
4.
(Optional.) Set the default
PW ID for the VSI.
5.
Set an MTU for the VSI.
6.
(Optional.) Enable the VSI.
Configuring a PW
Configuring a PW class
In a PW class, you can configure PW attributes such as the PW data encapsulation type, and
whether to enable control word. To simplify PW configuration, you can configure PWs with the same
attributes by referencing the same PW class.
To configure a PW class:
Step
1.
Enter system view.
2.
Create a PW class and enter
PW class view.
3.
(Optional.) Enable control
word.
Command
system-view
vsi vsi-name [ hub-spoke ]
description text
default-pw-id default-pw-id
mtu size
undo shutdown
Command
system-view
pw-class class-name
control-word enable
446
Remarks
N/A
By default, no VSIs exist.
If you specify the hub-spoke
keyword for a VSI, the VSI
supports the hub-spoke network
model.
By default, no description is
configured for a VSI.
By default, no default PW ID is
configured for the VSI.
By default, the MTU of a VSI is
1500 bytes.
By default, a VSI is enabled.
Remarks
N/A
By default, no PW classes exist.
By default, control word is
disabled.
Advertisement
Table of Contents
