HP FlexNetwork HSR6600 Configuration Manual page 381

[PE1-isis-2-ipv4] quit
[PE1-isis-2] quit
[PE1] interface pos 1/1/0
[PE1-Pos1/1/0] ip binding vpn-instance vpn1
[PE1-Pos1/1/0] ip address 11.1.1.2 24
[PE1-Pos1/1/0] isis enable 2
[PE1-Pos1/1/0] mpls enable
[PE1-Pos1/1/0] mpls ldp enable
[PE1-Pos1/1/0] mpls ldp transport-address interface
[PE1-Pos1/1/0] quit
[PE1] bgp 100
[PE1-bgp-default] ip vpn-instance vpn1
[PE1-bgp-default-vpn1] address-family ipv4 unicast
[PE1-bgp-default-ipv4-vpn1] import isis 2
[PE1-bgp-default-ipv4-vpn1] quit
[PE1-bgp-default-vpn1] quit
[PE1-bgp-default] quit
# Configure CE 1.
[CE1] interface pos 1/1/1
[CE1-Pos1/1/1] ip address 11.1.1.1 24
[CE1-Pos1/1/1] isis enable 2
[CE1-Pos1/1/1] mpls enable
[CE1-Pos1/1/1] mpls ldp enable
[CE1-Pos1/1/1] mpls ldp transport-address interface
[CE1-Pos1/1/1] quit
PE 1 and CE 1 can establish an LDP session and IS-IS neighbor relationship between them.
# Configure PE 2 and CE 2 in the same way that PE 1 and CE 1 are configured. (Details not
shown.)
4. Connect end customers and the customer carrier:
# Configure CE 3.
<CE3> system-view
[CE3] interface gigabitethernet 1/1/1
[CE3-GigabitEthernet1/1/1] ipv6 address 2001:1::1 96
[CE3-GigabitEthernet1/1/1] quit
[CE3] bgp 65410
[CE3-bgp-default] peer 2001:1::2 as-number 100
[CE3-bgp-default] address-family ipv6
[CE3-bgp-default-ipv6] peer 2001:1::2 enable
[CE3-bgp-default-ipv6] import-route direct
[CE3-bgp-default-ipv6] quit
[CE3-bgp-default] quit
# Configure PE 3.
[PE3] ip vpn-instance vpn1
[PE3-vpn-instance-vpn1] route-distinguisher 100:1
[PE3-vpn-instance-vpn1] vpn-target 1:1
[PE3-vpn-instance-vpn1] quit
[PE3] interface gigabitethernet 1/1/1
[PE3-GigabitEthernet1/1/1] ip binding vpn-instance vpn1
371