HP FlexNetwork HSR6600 Configuration Manual page 173

Comware 7 mpls

Hide thumbs Also See for FlexNetwork HSR6600:

Table of Contents

For TE LSAs to be generated, a minimum of one OSPF neighbor must reach FULL state.

To resolve the problem:

a. Use the display current-configuration command to verify that MPLS TE is configured on

involved interfaces.

b. Use the debugging ospf mpls-te command to verify that OSPF can receive the TE LINK

establishment message.

c. Use the display ospf peer command to verify that OSPF neighbors are established

If the problem persists, contact Hewlett Packard Enterprise Support.