Panasonic KX-NS1000 Programming Manual page 24

1.2.1 Starting Web Maintenance Console
3.
The Web Maintenance Console login screen is displayed. For details about logging in, see 2.1.3 Logging
in to Web Maintenance Console.
•
If this is the first time the PBX is accessed (i.e., it is in its initialised, factory default state), you must log
in using the Installer level account. Once you log in, the Easy Setup Wizard will launch. For details,
see 2.1.4 Easy Setup Wizard.
•
If the PBX has been set up using the Easy Setup Wizard, PBX system programming can be performed.
To perform programming, enter the login name and password according to your status and
authorisation level. For details about the differences between levels of authorisation, see 2.1.1 Web
Maintenance Console Accounts.
4.
After you successfully log in to Web Maintenance Console, the Home screen will be displayed and
programming can be performed. For details about accessing the different features of Web Maintenance
Console, see 2.1.5 Software Interface.
Connecting to Web Maintenance Console (Off-line Mode)
To connect to Web Maintenance Console in Off-line mode, use the New -Offline Mode or Open -Offline
Mode operations in the Off-line Web Maintenance Console programme launcher. For details, refer to 1.2.2 PC
Programming Using Off-line Mode.
24 PC Programming Manual