1.5 Making Call Features
1.5
Making Call Features
1.5.1
Predialing
Description
A display proprietary telephone (PT) user can check and correct the number to be dialed on-
hook. The call will be initiated after going off-hook.
Conditions
•
Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO
DIAL/STORE button. (
extension will enter personal programming mode automatically so that a name can be
assigned to the stored number.
User Manual References
User Manual
3.1.2 Settings on the Programming Mode
1.5.2
Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time
period, the user will hear a reorder tone. This operation applies to intercom calls only.
This feature is also known as Automatic Station Release.
Conditions
•
A proprietary telephone (PT)/portable station (PS) user hears a reorder tone for a
preprogrammed time period, and then the PT/PS returns to idle status automatically. A
single line telephone (SLT) user will hear a reorder tone until he or she goes on-hook.
•
This feature works in one of the following cases:
When making an intercom call
a)
b)
50
Feature Guide
1.6.1.4 Speed Dialing—Personal/System) In this case, the
The first digit is not dialed within a preprogrammed time period.
A digit is dialed, but subsequent digits are not dialed within a preprogrammed time
period.