Adding New Concentrates or Changing the Type
New concentrates can be either selected from a pre-programmed list or by entering the
concentrate manually. This process is performed in Service Mode.
Step 1
Power the machine On into Service Mode by pressing the CONFIRM key when prompted
during the power up sequence.
Step 2
Select the Options screen-button and then the Enter Conc screen-button.
Step 3
Verify that the correct family of concentrates is selected. If it is not, select Change Type and
select the correct family using the or (up/down) keys on the Keyboard.
Select the
Change Type
button and use
the Keyboard to
change the
concentrate type
of dilution to the
desired family
Figure 75 – Selecting the Concentrate Type
Step 4
Do one of the following:
Select Add from Catalog if the concentrate is available in the pre-programmed list or
Select Add New and create a new concentrate manually.
2008T Machine Operator's Manual P/N 490122 Rev N
Appendix C
245