Chapter 3—Setting Treatment Parameters
1) The electrolyte profile of the
highlighted selection is
displayed in this column.
Note: If the machine is set up
for use with Citrasate a
'Citrate' meter box will be
displayed in the dialysate
constituent list.
2) Highlight the desired
selection by scrolling through
the choices using the or
(up or down) keys on the
keyboard. Acetate
formulations can also be
selected as a treatment option.
3) When the desired type is highlighted, press
the Enter key or CONFIRM key on the Touchpad
to save the selection and return to the "Dialysate"
screen.
Note: Be sure the acid/bicarbonate concentrates
connected to the machine match the type
selected from the Concentrate menu.
4) Enter the prescribed Base Na+
and Bicarbonate values as described
in "Entering a Treatment Parameter."
Figure 31 – Entering Concentrate Information
70
2008T Machine Operator's Manual P/N 490122 Rev N