Moving Across A Level Surface; Moving Over A 3/4 Inch Threshold; Moving Down A 1 1/2 Inch Step - Fresenius Medical Care 2008T Operator's Manual

Hemodialysis machine
Hide thumbs Also See for 2008T:
Table of Contents

Advertisement

Chapter 1—Overview
Warning! Tip Hazard. Do not push or lean against machine when the wheel lock is set.
Warning! Be careful not to tip the machine when rolling it over uneven surfaces. Push the
machine from the middle when moving it.

Moving across a level surface

Before moving the machine,
properly secure the IV pole
to its lower mount. Hold the
IV pole below its upper
mount as a handle to
maintain control of the
machine. Push the machine
from the middle when
moving it.
Moving over a ¾ inch threshold
1. Stop machine at
threshold.
Moving down a 1 ½ inch step
1. Stop machine at
step.
Figure 19 – Moving the 2008T Hemodialysis Machine
44
2. Brace foot against base. Use
IV pole to raise forward
wheels onto threshold. Do
not tip machine too far back!
2. Brace foot against base.
Hold IV pole above upper
mount.
2008T Machine Operator's Manual P/N 490122 Rev N
Hold IV pole below
upper mount
Secure IV pole to lower
mount
3. Push machine slowly
over threshold. Keep
firm hold on IV pole.
3. Slowly lower machine
down step. Keep firm
hold on IV pole. Do not
tip machine too far
forward!

Advertisement

Table of Contents
loading

Table of Contents