Adding New Concentrates Or Changing The Type - Fresenius Medical Care 2008K Operator's Manual

Appendix B

Adding New Concentrates or Changing the Type

New concentrates can be either selected from a pre-programmed list or by entering the
concentrate manually. This process is performed in Service Mode.
Step 1
Power the machine On into Service Mode by pressing the CONFIRM key when prompted
during the power up sequence.
Step 2
Touch the Options screen-button and then the Enter Conc. screen-button.
Step 3
Verify that the correct family of concentrates is selected. If it is not, select Change Type and
select the correct family using the
Touch the
Change Type
button and use
the data entry
keypad to
change the
concentrate type
of dilution to the
desired family
Figure 67 – Selecting the Concentrate Type
204

or  (up/down) keys on the data entry keypad.
2008K Hemodialysis Machine Operator's Manual Rev P