Chapter 3—Setting Treatment Parameters
To enter an ultrafiltration profile:
1) From the Home or SVS
Profile screen, select UF Profile
to open the "UF Profile" screen.
Figure 36 – Setting a UF Profile
2) Select the profile
button that
graphically
represents the
prescribed manner
in which
ultrafiltration is to be
carried out. An
enlarged view of the
selected profile will
appear on the right
side of the
subscreen.
Figure 37 – Setting UF Profile Parameters
80
This button (UF Profile
in the "Home" screen)
changes to the selected
profile when selection is
confirmed.
2008T Machine Operator's Manual P/N 490122 Rev N
3) If not previously
entered from the
"Home" screen,
enter the UF Goal
and UF Time
values (see
"Entering a
Treatment
Parameter" on
page 62).
4) Press
CONFIRM.