To Add A New Concentrate That Is Not In The Catalog - Fresenius Medical Care 2008T Operator's Manual

To add a new concentrate that is not in the catalog

Select the Add New button. Modify all of the constituents to match the concentrate. If a dry
concentrate is being used, set the GranuFlo® option to Yes (by selecting the GranuFlo®
toggle-button and pressing CONFIRM when the YES toggle is selected). Select the Conc
Name button and then input the desired alphanumeric name using the keyboard. Press
CONFIRM to confirm your changes. After all of the constituents are correctly entered and
the name of the concentrate has been chosen, select the Enter Conc screen button to verify
that the concentrate was entered into the list (see Figure 77 – Adding a new concentrate
below).
Note: If the new concentrate is Acetate, determine the value for the Sodium (Na+),
Potassium, (K+), Calcium (Ca++), Magnesium (Mg++), Acetate, and Dextrose. The
calculated values are Chloride (Cl-) and Acetic Acid.
Note: When GranuFlo is selected, the acid concentrate's Acetate value of 8 mEq/l will be
displayed as 4 mEq/l each in the Acetic Acid and Na Acetate fields.
Select the Conc
Name button
and enter the
desired name.
Modify all
constituents to
match the
concentrate label.
Figure 77 – Adding a new concentrate
2008T Machine Operator's Manual P/N 490122 Rev N
Appendix C
247