Test & Options Screen Settings - Fresenius Medical Care 2008T Operator's Manual

Chapter 3—Setting Treatment Parameters
Test & Options Screen Settings
The "Test & Options" screen is divided into two distinct sections. The left side of the screen
is used to initiate the self test and show the results (see "Testing the 2008T Hemodialysis
Machine" on page 55). The right side of the screen is available to set the machine for various
treatment options. Refer to the table below for descriptions of the purpose and functions of
each button.
Figure 44 – The Test & Options Screen (with optional Crit-Line software)
The following table describes the operator-programmable features in the "Test & Options"
screen.
Table 20 – Test & Options Screen Buttons
Button
92
Function
This test will initiate both the pressure holding tests (PHT) and the alarm
test functions.
The user can choose to do a Pressure Holding Test with this button.
2008T Machine Operator's Manual P/N 490122 Rev N