Control Panel Keypad - Fresenius Medical Care 2008T Operator's Manual

Control Panel Keypad

Figure 4 – Control Panel Keypad
The Control Panel Keypad contains seven keys associated with starting or stopping the basic
power and alarm aspects of any dialysis treatment. The table below lists each key and its
function.
Caution: Use a finger to press the keys and the touchscreen. Use of objects to press the
keys or touchscreen may result in damage or premature failure.
Table 1 – Control Panel Keypad Keys
Press ... To ...
Turn the machine on. Hold for one second to turn the power off and If blood is
sensed, the machine will power down with an audible alarm.
Silence an alarm for two minutes or until another alarm occurs.
2008T Machine Operator's Manual P/N 490122 Rev N
Note: The following alarms are muted for an extra four minutes (for
a total of six minutes) when using a bibag disposable for the
bicarbonate source: Conductivity Low, Conductivity High, bibag:
Cond Low, Bicarb Cond 2 Low, Bicarb Cond 2 High, Low
Temperature, and High Temperature.
Chapter 1—Overview
23