Fresenius Medical Care 2008T Operator's Manual page 107

Display
Final RBV
Concentrate
SVS profile
Na Base
Na Start
SpKt/V
eKt/V
Volume
BVP
Kt
Avg Art
Press
Mean Kecn
Avg Ven
Press
Avg Dial.
Flow
Avg blood
Flow
Last Access
Flow
Avg Recirc.
High Flux
2008T Machine Operator's Manual P/N 490122 Rev N
Description
This is the last Relative Blood Volume from the BVM, if available (% of
initial value)
This is the concentrate selected for this treatment
This is the Sodium Variation System profile selected for the treatment
+
This is the base Na level for the Sodium Variation System program
(mEq/l)
+
This is the starting Na level for the Sodium Variation System program
(mEq/l). If SVS is not selected, it is the sodium used.
This is the current Single pool Kt/V (SpKt/V). If the projected Kt/V is
below the acceptable level, the value is shown in red.
This is the current equilibrated Kt/V (eKt/V)
This is the volume used for the Kt/V calculation (liters)
This is total blood volume processed (liters).
This is effective blood volume processed (liters).
This is the average arterial pressure for the treatment (mmHg)
The time weighted average of the individual Kecn measurements
This is the average venous pressure for the treatment (mmHg)
This is the average dialysate flow used for the treatment (ml/min)
This is the average blood flow used for the treatment (ml/min)
This is the last access flow determination, if available (ml/min)
This is the average of all the recirculation determinations made for this
treatment (%)
This shows whether or not the High Flux dialyzer option is set.
Chapter 4—Monitoring the Treatment
107