Wd: 24V Rcvr Err Long; Wd: 24V Rcvr Err Short; Wd: Fail Long Pulse; Wd: Fail Short Pulse - Fresenius Medical Care 2008T Operator's Manual

Message Purpose of Message
Wait, OLC Aborting Changed blood pump flow rate,
changed dialysate flow rate, or
unstable conductivity caused on line
clearance test to stop.
Wait: Rinsing Line The machine is rinsing the
concentrate lines prior to a cleaning
or disinfecting program.

WD: 24v Rcvr Err Long

Electronic self-test failure.

WD: 24v Rcvr Err Short

Electronic self-test failure.

WD: Fail Long Pulse

Electronic self-test failure.

WD: Fail Short Pulse

Electronic self-test failure.
217 Troubleshooting
Type Action Required
Advisory Wait until stable conditions for OLC test to begin again
Advisory Advisory only. No action is required. Line rinsing takes about 45
seconds.
Alarm Turn machine power off and back on. If alarm is not cleared, take the
machine out of service and alert a qualified service technician.
Alarm Turn machine power off and back on. If alarm is not cleared, take the
machine out of service and alert a qualified service technician.
Alarm Turn machine power off and back on. If alarm is not cleared, take the
machine out of service and alert a qualified service technician.
Alarm Turn machine power off and back on. If alarm is not cleared, take the
machine out of service and alert a qualified service technician.
ALARMS
TROUBLE-
SHOOTING
2008T Machine Operator's Manual P/N 490122 Rev N