Fresenius Medical Care 2008T Operator's Manual page 208

208 Troubleshooting
SN BP Comm. Timeout Time out when receiving Intel-Hex-
line or overflowed received buffer
SN BP Del. Rate Alarm Actual speed-read back analog
voltage at X348/10 is out of limits
SN BP Direction Alarm Pump is turning in the wrong direction
SN BP EEPROM Error EEPROM error
SN BP EPROM Error EPROM CRC error
Error erasing Flash ROM while in
SN BP Erasing Error
Service Mode
SN BP Flash Error Error copying data into Flash ROM
while in Service Mode
SN BP Level Up Alarm Pressure increase when the Level Up
key is pressed
SN BP Pressure Alarm Arterial pressure-read back analog
voltage at X348/7 is out of limits
SN pressure-read back analog
voltage is out of limits
SN BP RAM Error RAM check error
SN BP Rate Alarm Pump is not reaching speed at
maximum voltage
SN BP Receiving Alarm Error in received Intel-Hex-line
SN BP ROM Error Flash ROM CRC error
SN BP Rotation Error Pump rotor turning when it should not
be for a second time
SN BP Set Rate Alarm Set speed-read back analog voltage
at X348/14 is out of limits
SN BP Stop Alarm Pump rotor turning when it should not
be
SN BP Tach Alarm Optical tachometer not in range
SN BP Task Error Software task was not completed
correctly
SN BP Timer Error 50 ms second time period exceeded
SN BP Update Error Transmit error during Flash update
while in Service Mode
2008T Machine Operator's Manual P/N 490122 Rev N
Alarm See message A.27
Alarm See message A.21
Alarm See message A.13
Alarm See message E.05
Alarm See message E.01
Alarm See message E.98
Alarm See message E.97
Alarm See message A.25
Alarm See message A.22
Alarm See message E.03
Alarm See message A.11
Alarm See message A.28
Alarm See message E.02
Alarm See message E.23
Alarm See message A.20
Alarm See message A.29
Alarm See message A.24
Alarm See message E.15
Alarm See message E.14
Alarm See message E.99