Centrecom FS980M/9 Command Reference Manual page 106

F C M
ILE AND ONFIGURATION ANAGEMENT
SHOW BOOT
Table 1: Parameters in the output of the show boot command (cont.)
Related autoboot enable
Commands
boot config-file backup
boot system backup
show autoboot
613-50137-01 Rev A
C
OMMANDS
Parameter
Backup boot config
Autoboot status
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The configuration file to use during the next boot cycle if
the main configuration file cannot be loaded.
The status of the Autoboot feature; either enabled or
disabled.
106