6. Thermistor and Thermofuse Replacement
1. Remove the fusing left
ment".)
- Thermofuse Replacement -
2. Replace the thermofuse [A] (2 screws).
- Thermistor Replacement -
2. Remove the fusing support bracket [B] (2 screws).
3. Replace the thermistor [C] (1 screw, 3 clamps, and 1 connector).
4. Adjust the hot roller temperature using SP 34. (Refer to "Hot Roller
Temperature Adjustment.")
(Refer to "Hot Roller Stripper Replace-
cover.
5-49
30
April, '89