Dialog Program; Program Structure - Siemens Sinumerik 840D sl Function Manual

05.07

6.2 Dialog program

6.2.1 Program structure

DNC IFC Dialog analyzes the following rows in the [DIALOGFUNCTION] section
of the machine configuration file:
Program number
Dialog function ID
%MPF9999
Command program row
Dialog function command
(S), (ST); (SL) or (R)
File name program row
File name

Specific name

(Wildcard)

X999 (wildcard alternative for controllers that cannot edit all characters)
File types program row
File type

Specific type

(Wildcard)

Y001 (alternative for specific type with controllers that cannot edit all
characters; Y001 normally represents MPF files)
The program end IDs M00, M17, and M30 are evaluated indirectly.
Note
This section of the machine configuration file can also be created in the
configuration dialog, which is described in Section Configuration  Configuration
dialog  Dialog function tab page.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
6 Dialog function
FBDN1/6-133