Troubleshooting the Emulation Probe
Using the Emulation Probe Command Line Interface
Configuration commands
The following commands are useful to determine whether your emulation
probe is working properly.
cf proc
? cf proc
cf proc=MMC2107
cf speed
cf speed=512K
cf speed=10M
help cf speed
138
Read the current processor choice
Show processor types supported by the firmware
which has been loaded into the emulation probe
Set the processor to type Motorola M•CORE MMC2107
Read the speed setting
Set the JTAG communication speed to 512 kHz
Set the JTAG communication speed to a 10 MHz
Show valid JTAG communication speed choices
Emulation for the Motorola M•CORE