Table of Contents
Advertisement
Reinstalling the files
Configuration
Agilent N4373A Lightwave Component Analyzer, First Edition
Configuration of the InstrInfo.txt File
You will find this file at
C:\Program Files\Agilent\Network
Analyzer\Applications\Lca\Information
;Inst VISA
Model
;ID
Resource Name
Name
;-----------------------------------------------------------
VNA1, GPIB0: : 16: : INSTR, PNA,
;------------------- < end of file > -----------------------
• Set the underlined numbers in red to the same values as the measuring device.
1 From the recovery CD, run the program "Setup.Exe" .
2 Restore the calibration and other data from your most
recent backup to the directory
C:\Program Files\Agilent\Network Analyzer\Applications\L
CA\Table
Configuring the device
The GPIB address for the Network Analyzer is 16.
This address is set by default in the program. However, situations
may arise which necessitate changing the address. If the measuring
device address changes, edit the InstrInof.txt file in the Information
folder.
Troubleshooting and Maintenance
Live
Option TimeOut Mode
none, 5,
On
103
Advertisement
Table of Contents
