Download  Print this page

Snmp-agent Trap If-mib Link Extended - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing.
Hide thumbs

Advertisement

Table 30 Standard SNMP notifications
Keyword
authentication
coldstart
linkdown
linkup
warmstart
system: Specifies system notifications sent when the system time is modified, the system reboots, or the
main system software image is not available.
Usage guidelines
The snmp-agent trap enable command enables the device to generate notifications, including both
informs and traps, even though the keyword trap is used in the command.
You can use the snmp-agent target-host command to enable the device to send the notifications as
informs or traps to a host.
If no optional parameters are specified, the command or its undo form enables or disables all SNMP
notifications supported by the device.
Examples
# Enable the SNMP agent to send SNMP authentication failure traps to 10.1.1.1 in the community public.
<Sysname> system-view
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname
public
[Sysname] snmp-agent trap enable standard authentication
Related commands
snmp-agent target-host

snmp-agent trap if-mib link extended

Use snmp-agent trap if-mib link extended to configure the SNMP agent to send extended
linkUp/linkDown notifications.
Use undo snmp-agent trap if-mib link extended to restore the default.
Syntax
snmp-agent trap if-mib link extended
undo snmp-agent trap if-mib link extended
Default
The SNMP agent sends standard linkUp/linkDown notifications.
Views
System view
Definition
Authentication failure notification sent when an NMS fails to authenticate to the SNMP
agent.
Notification sent when the device restarts.
Notification sent when the link of a port goes down.
Notification sent when the link of a port comes up.
Notification sent when the SNMP agent restarts.
149

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: