Download  Print this page

HP FlexFabric 12500 Series Network Management And Monitoring Command Reference Page 15

Routing.
Hide thumbs

Advertisement

round-trip min/avg/max/std-dev = 4.000/25.000/62.000/20.000 ms
# Test whether the IPv6 address (2001::2) is reachable. Only the statistics is displayed.
<Sysname> ping ipv6 –q 2001::2
Ping6(56 data bytes) 2001::1 --> 2001::2, press CTRL_C to break
--- Ping6 statistics for 2001::2 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.000/25.000/62.000/20.000 ms
# Test whether the IPv6 address (2001::2) is reachable. Detailed ping information is displayed.
<Sysname> ping ipv6 –v 2001::2
Ping6(56 data bytes) 2001::1 --> 2001::2, press CTRL_C to break
56 bytes from 2001::2, icmp_seq=0 hlim=64 dst=2001::1 idx=3 time=62.000 ms
56 bytes from 2001::2, icmp_seq=1 hlim=64 dst=2001::1 idx=3 time=23.000 ms
56 bytes from 2001::2, icmp_seq=2 hlim=64 dst=2001::1 idx=3 time=20.000 ms
56 bytes from 2001::2, icmp_seq=3 hlim=64 dst=2001::1 idx=3 time=4.000 ms
56 bytes from 2001::2, icmp_seq=4 hlim=64 dst=2001::1 idx=3 time=16.000 ms
--- Ping6 statistics for 2001::2 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.000/25.000/62.000/20.000 ms
The output shows that:
The destination is reachable, and ICMPv6 echo requests are replied.
The minimum/average/maximum/standard deviation roundtrip time of packets is 4 milliseconds,
25 milliseconds, 62 milliseconds and 20 milliseconds.
Table 2 Command output
Field
Ping6(56 data bytes)
2001::1 --> 2001::2, press CTRL_C to
break
56 bytes from 2001::2,
icmp_seq=1 hlim=64 dst=2001::1
idx=3 time=62.000 ms
--- Ping6 statistics for 2001::2 ------
5 packet(s) transmitted
5 packet(s) received
0.0% packet loss
Description
A 104-byte ICMPv6 echo reply with a data length of 56 bytes is sent
from 2001::1to 2001::2.
Press Ctrl+C to abort the ping IPv6 operation.
Received ICMPv6 echo replies from the device whose IPv6 address is
2001::2.
The number of data bytes is 56.
The packet sequence is 1.
The hop limit value is 64.
The destination address is 2001::1. Specify the -v keyword to
display this field.
The index for the packet inbound interface is 3. Specify the -v
keyword to display this field.
The response time is 62 milliseconds.
Statistics on data received and sent in an IPv6 ping operation.
Number of ICMPv6 echo requests sent.
Number of ICMPv6 echo replies received.
Percentage of packets not responded to the total packets sent.
7

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: