HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 172

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Field
buckets max
Sampling record
dropevents
octets
packets
broadcast packets
multicast packets
CRC alignment errors
undersize packets
oversize packets
fragments
jabbers
collisions
utilization
Related commands
rmon history
Description
Maximum number of samples that can be saved for the history control entry (MIB
object historyControlBucketsGranted).
If the expected bucket size specified with the rmon history command exceeds the
available history table size, RMON sets the bucket size as closely to the expected
bucket size as is possible.
If the bucket has been full, RMON overwrites the oldest sample with the new
sample.
History sample index (MIB object etherHistorySampleIndex).
Total number of events in which packets were dropped during the sampling
interval (MIB object etherHistoryDropEvents).
NOTE:
This statistic is the number of times that a drop condition occurred. It is not
necessarily the total number of dropped packets.
Total number of octets received during the sampling interval (MIB object
etherHistoryOctets).
Total number of packets (including bad packets) received during the sampling
interval (MIB object etherHistoryPkts).
Number of broadcasts received during the sampling interval (MIB object
etherHistoryBroadcastPkts).
Number of multicasts received during the sampling interval (MIB object
etherHistoryMulticastPkts).
Number of packets received with CRC alignment errors during the sampling
interval (MIB object etherHistoryCRCAlignErrors).
Number of undersize packets received during the sampling interval (MIB object
etherHistoryUndersizePkts).
Undersize packets are less than 64 octets (excluding framing bits but including
FCS octets).
Number of oversize packets received during the sampling interval (MIB object
etherHistoryOversizePkts).
Oversize packets are longer than 1518 octets (excluding framing bits but
including FCS octets).
Number of undersize packets with CRC errors received during the sampling
interval (MIB object etherHistoryFragments).
Number of oversize packets with CRC errors received during the sampling
interval (MIB object etherHistoryJabbers). The device does not support this field,
and 0 is displayed.
Number of colliding packets received during the sampling interval (MIB object
etherHistoryCollisions).
Bandwidth utilization (in hundreds of a percent) during the sampling period (MIB
object etherHistoryUtilization).
164

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents