Ntp-Service Unicast-Server - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

ntp-service unicast-server

Use ntp-service unicast-server to specify an NTP server for the device.
Use undo ntp-service unicast-server to remove an NTP server specified for the device.
Syntax
ntp-service unicast-server { server-name | ip-address } [ vpn-instance vpn-instance-name ]
[ authentication-keyid keyid | priority | source interface-type interface-number | version number ] *
undo ntp-service unicast-server { server-name | ip-address } [ vpn-instance vpn-instance-name ]
Default
No NTP server is specified for the device.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
server-name: Specifies the host name of the NTP server, a case-insensitive string of 1 to 253 characters.
ip-address: Specifies an IP address of the NTP server. It must be a unicast address, rather than a
broadcast address, a multicast address or the IP address of the local clock.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the NTP server belongs, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the NTP server is on the public
network, do not specify this option.
authentication-keyid keyid: Specifies the key ID to be used for sending NTP messages to the NTP server,
where keyid is in the range of 1 to 4294967295. If the option is not specified, the local device and NTP
server do not authenticate each other.
priority: Specifies this NTP server as the first choice under the same condition.
source interface-type interface-number: Specifies the source interface for NTP messages. For an NTP
message the local device sends to the NTP server, the source IP address is the primary IP address of this
interface. The interface-type interface-number argument represents the interface type and number.
version number: Specifies the NTP version. The value range for the number argument is 1 to 4, and the
default is 4.
Usage guidelines
When you specify an NTP server for the device, the device is synchronized to the NTP server, but the NTP
server is not synchronized to the device.
To synchronize the PE to a PE or CE in a VPN, provide vpn-instance vpn-instance-name in your
command.
If you include the vpn-instance vpn-instance-name option in the undo ntp-service unicast-server
command, the command removes the NTP server with the IP address of ip-address in the specified VPN.
If you do not include the vpn-instance vpn-instance-name option in this command, the command removes
the NTP server with the IP address of ip-address in the public network.
104

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents