Ntp-Service Refclock-Master - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Syntax
ntp-service multicast-server [ ip-address ] [ authentication-keyid keyid | ttl ttl-number | version number ]
*
undo ntp-service multicast-server [ ip-address ]
Default
The device does not operate in any NTP association mode.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies a multicast IP address in the range of 224.0.1.1 to 224.0.1.255. The default is
224.0.1.1. A multicast server and client must be configured with the same multicast IP address.
authentication-keyid keyid: Specifies the key ID to be used for sending multicast messages to multicast
clients, where keyid is in the range of 1 to 4294967295. If this option is not specified, the local device
cannot synchronize multicast clients enabled with NTP authentication.
ttl ttl-number: Specifies the TTL of NTP multicast messages, where ttl-number is in the range of 1 to 255.
The default value is 16.
version number: Specifies the NTP version. The value range for the number argument is 1 to 4, and the
default is 4.
Usage guidelines
After you configure this command, the device periodically sends NTP messages to the specified multicast
address.
If you have configured the device to operate in multicast server mode on an interface with this command,
do not add the interface to any aggregate group. To add the interface to an aggregate group, remove
the configuration of the command.
Examples
# Configure the device to operate in multicast server mode and send NTP multicast messages on
VLAN-interface 1 to the multicast address 224.0.1.1, using key 4 for encryption, and set the NTP version
to 4.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ntp-service multicast-server 224.0.1.1 version 4
authentication-keyid 4
Related commands
ntp-service multicast-client

ntp-service refclock-master

Use ntp-service refclock-master to configure the local clock as a reference source for other devices.
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents