HP FlexFabric 12500 Series Network Management And Monitoring Command Reference: Ntp-service Broadcast-client

Routing.
Hide thumbs

Advertisement

ntp-service broadcast-client

Use ntp-service broadcast-client to configure the device to operate in NTP broadcast client mode and
use the current interface to receive NTP broadcast packets.
Use undo ntp-service broadcast-client to remove the configuration.
Syntax
ntp-service broadcast-client
undo ntp-service broadcast-client
Default
The device does not operate in any NTP association mode.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After you configure this command, the device listens to NTP messages sent by the NTP broadcast server
and is synchronized based on the received NTP messages.
If you have configured the device to operate in broadcast client mode on an interface with this command,
do not add the interface to any aggregate group. To add the interface to an aggregate group, remove
the configuration of the command.
Examples
# Configure the device to operate in broadcast client mode and receive NTP broadcast messages on
VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ntp-service broadcast-client
Related commands
ntp-service broadcast-server
ntp-service broadcast-server
Use ntp-service broadcast-server to configure the device to operate in NTP broadcast server mode and
use the current interface to send NTP broadcast packets.
Use undo ntp-service broadcast-server to remove the configuration.
Syntax
ntp-service broadcast-server [ authentication-keyid keyid | version number ] *
undo ntp-service broadcast-server
Default
The device does not operate in any NTP association mode.
94

Advertisement

   Also See for HP FlexFabric 12500 Series

   Related Manuals for HP FlexFabric 12500 Series

This manual also for:

Flexfabric 12500e series

Comments to this Manuals

Symbols: 0
Latest comments: